Flooring Software Integration: Stop Typing Everything Twice

Most flooring stores type the same customer, quote and payment into three or four systems. Here is where the double entry hides, how to connect your tools, and what it saved one Mackay store.

Meesam Imran··7 min read
Flooring store back office desk with connected CRM, accounting and payment dashboards on screen

The short answer

Flooring software integration means connecting your website forms, CRM, flooring software, card terminal and accounting system so each customer, quote and payment is entered once. Use native integrations where they exist, a connector like Zapier or Make for simple hand-offs, and a custom link for anything that touches payments, quotes or customer records.

What is flooring software integration?

Integration means your systems pass information to each other automatically. When a customer fills in your website form, they appear in your CRM. When the quote is accepted, the job appears in your flooring software. When the deposit hits the card terminal, it is matched to the right invoice in MYOB or Xero. Nobody types it twice.

Most flooring stores run four to six tools: a website, a CRM or inbox, flooring software such as RFMS, QFloors or Floorzap, a card terminal, accounting software and supplier price lists. Each one works fine on its own. The cost is in the gaps between them.

Where does a flooring store re-type data today?

Walk through one job from enquiry to payment and count the times someone copies information by hand. In most stores it looks like this:

Typical hand-offs in an independent flooring store. Your list may be longer.
Hand-offWhat usually happensWhat goes wrong
Website form → CRMSomeone copies the enquiry from the inboxLeads sit overnight or get missed
CRM → flooring softwareCustomer details typed again to start the quoteSpelling and phone number errors, duplicate customers
Measure → quoteRoom sizes re-entered from paper notesWrong square metres, waste factor left out
Card terminal → accountingPayments matched to invoices one by oneHours a day reconciling, deposits missed
Accounting → follow-upOverdue list checked by handDebtors chased late or not at all
Supplier price list → quotesPrice changes updated manuallyQuotes sent at old prices, margin lost

None of this feels like a big job on its own. Added up, it is often hours a day. Across industries, about a third of sales reps spend more than an hour a day on manual data entry, and 85% say they have made a mistake because of incorrect data in their CRM.

Native integrations vs Zapier or Make vs custom: which should you use?

There are three ways to connect two systems. The right one depends on what the data is and what happens if it goes wrong.

Rule of thumb: the closer the data is to money, the more it needs checks, logging and a human approval step.
MethodWhat it isBest forWatch out for
Native integrationA connection built by the software vendorStandard hand-offs the vendor supports, like flooring software to accountingOnly covers what the vendor chose to build
Connector tool (Zapier, Make)A no-code tool that passes data between appsSimple one-way hand-offs, like form to CRM or new job to calendarBreaks quietly when a field changes; per-task fees add up
Custom integrationA direct link built for your workflowPayments, quotes, customer records and anything needing checks or approvalNeeds someone to build and look after it

What already connects, and what usually doesn’t

Flooring software vendors have added some useful links. QFloors’ QPro, for example, sends payments, deposits and journal entries into QuickBooks Online, and its QLeads add-on uploads website leads straight into the system. QFloors has pointed out that generic accounting software needs workarounds for flooring because it doesn’t understand units like square yards.

What is usually still missing:

  • Matching card terminal payments (Tyro, Clover, Square) to the right invoice in MYOB or Xero
  • Turning a measure or a quick message into a priced quote
  • Following up every open quote on a schedule
  • Chasing overdue trade and retail accounts
  • Daily checks that jobs, stock and installers line up

These are also the jobs that eat the most time, which is why they are the best place to start.

Not sure where your store is re-typing? We mystery-shop your store, time every reply and map the hand-offs that cost you the most. Free, in 48 hours.

Get my free Lead Leak Report →

A 5-step plan to integrate your flooring software

  1. List every tool and every hand-offFollow one real job from enquiry to final payment. Write down each time information moves from one system to another, and who moves it.
  2. Pick one source of truth for each recordDecide where the customer record lives, where the quote lives and where payments live. Everything else reads from there. This prevents duplicate customers and sync loops.
  3. Use native links firstTurn on what your flooring and accounting software already supports. It is the cheapest and most reliable option.
  4. Fill the money gaps with a custom linkPayments, quotes and debtor follow-up need checks, logs and approval steps. Build these properly rather than chaining connector tools.
  5. Test with real jobs, then add the next hand-offRun a week of real quotes and payments through it with your team. When it is reliable, move to the next gap.

What integration saved one Mackay flooring store

A Choices Flooring store in Mackay kept its existing CRM, MYOB and card terminal. Instead of replacing software, it connected the gaps between them.

What changed at a Choices Flooring store in Mackay

One independent store in the Choices Flooring network, Mackay, Queensland. Ava, a Veloq digital employee, works inside the store’s existing CRM and staff approve anything sensitive over WhatsApp.

BeforeAfter automation
Payment matching
2+ hours a day reconciling
Matched in under 3 minutes
Daily checks on jobs and stock
3+ hours a day
3+ hours a day saved
Writing a quote
15 to 20 minutes by hand
Under a minute from one WhatsApp message
Customer onboarding
~7 minutes of data entry each
About 30 seconds

Figures from Veloq’s case study with Choices Flooring Mackay. Results from one store; yours will depend on volume and process.

The biggest single win was payment matching. What used to take more than two hours every morning now takes under three minutes, and staff approve anything unusual from their phone.

Mistakes to avoid

  • Two-way sync between everything. If two systems both update each other, a single edit can loop or overwrite good data. Pick one source of truth per record.
  • Creating customers in more than one place. Duplicate records break reporting and follow-up. Match on phone and email before creating anyone new.
  • Automating money with no checks. Anything that posts payments or sends invoices should log what it did and ask a person when something doesn’t match.
  • Connecting everything at once. Start with the hand-off that costs the most time. Prove it, then add the next.

Frequently asked questions

Can RFMS or QFloors connect to MYOB or Xero?

Some flooring systems have native accounting links, such as QFloors’ QPro with QuickBooks Online. Where there is no native link, or it doesn’t cover payment matching, a custom integration can pass invoices and payments between them.

Is Zapier enough to integrate a flooring store?

For simple one-way hand-offs, like a web form into your CRM, yes. For payments, quotes and customer records, a custom link with checks and logging is safer, because connector tools can fail quietly.

How long does flooring software integration take?

One workflow, such as payment matching or quote follow-up, can usually be connected and tested in about a week. A full integration across every tool is best done one hand-off at a time.

Do I need to change my flooring software?

No. Integration works with the tools you already use. The aim is to stop re-typing, not to retrain your team on new software.

What should I integrate first?

The hand-off that costs the most time or money. For most stores that is payment matching, quote follow-up or getting new leads into the CRM within minutes.

7-Day Workflow Build · 8 new stores a month

Connect your busiest hand-off, live in 7 days.

We connect it across the tools you already use. No new software for your team.

  • Your #1 hand-off connected: payment matching, quote follow-up, debtor chasing or lead replies
  • Custom CRM pipeline: enquiry → measure → quote → won → installed → paid
  • Missed-call text-back, so no caller hits voicemail
  • Automatic Google review requests after every install
  • Owner dashboard: open quotes, follow-ups due, money owed
  • Team training and 30 days of tuning after go-live
$1,500 USDone-time setup and build
  • Live in 7 days or you don’t pay*
  • Saves 5+ hours a week within 30 days, or we keep working free until it does*
Book a free call →Or start with a free Lead Leak Report

*Guarantees apply when we receive your logins and details within 48 hours of kickoff. More automations and ongoing support are quoted separately.

Related guides

Sources

Written by Meesam Imran

Meesam builds AI automations for flooring stores and contractors at Veloq, the engineer-led AI software house. He works hands-on with flooring businesses like Choices Flooring in Mackay, Queensland, automating quoting, lead follow-up, debtor chasing and payment matching inside the tools they already use. His guides draw on that client work and on current flooring industry research.

Currently accepting new clients

See what you could automate first.

Book a free 30-minute call. We map your lead-to-job process and show you exactly where automation pays off, in plain English.